Welcome to cisco-certification-exam,This is your best friend AK,Here is our world for exam information exchange.
Let us share some questions about CISCO-350-020.which provided by Pass4sure test engine.
1.An inverse ARP is sent:

A: To map a hostname to an IP address
B: To map an IP address to a hostname
C: To map an MAC address to an IP address
D: To map a MAC address to a hostname
E: To map an IP address to a MAC address
Correct Answers:?? C
2.The size of the payload part of a STM-N signal is:

A: N x 252 columns by 9 rows
B: N x 261 columns by 9 rows
3.Telcordia has defined national ISDN, which is basically within the construct of Q.931 protocol with some modifications. If National ISDN requires a new information element (IE), how will this need be handled?

A: No new IE can be defined by standard bodies other than ITU-T; therefore, Telcordia must pass the information in open fields of existing IE.
B: Telcorida has to define a new codeset (CS) 0 IE.
C: Telcordia should define a new CS7 IE
D: Telcordia should define a new CS5 IE
E: Use CS8 IE
Correct Answers:?? D
4.Click the Exhibit button.

When the G-series card Rx interface at “A” in the diagram loses it’s receive signal, what occurs?
??
A: The G-series card at “A” reports link down and sends an AIS alarm upstream.
B: The G-series card at “A” reports link down, but the SONET path remains up.
C: The Tx signal on the G-series card at either end of the circuit is shut off, causing the device connected to each G-series card to
report link down.
D: The Tx signal on the G-series at “A” is shut off, but the Tx signal on the G-series at “E” remains on to maintain link integrity.
Correct Answers:?? C